PASCO Specialty & Mfg. SF-9585A User Manual

Browse online or download User Manual for Power supply units PASCO Specialty & Mfg. SF-9585A. PASCO Specialty & Mfg. SF-9585A User's Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Instruction Sheet
for the PASCO
Model SF-9585A
HIGH VOLTAGE POWER SUPPLY
012-05725B
11/95
$1.00
© 1994 PASCO scientific
This instruction sheet edited by: Tom Reineking
Introduction
The PASCO scientific Model SF-9585A High Voltage
Power Supply provides regulated DC power up to 50 mA
in two voltage ranges: 0 to -50 and 0 to 500 volts. The
outputs for the two ranges are independently adjustable,
though a single terminal is used as the positive terminal
for the 50 volt output and as the negative terminal for the
500 volt output. The meters read voltage and current in
either range.
In addition, a separate filament voltage supply provides
unregulated AC power up to 3 amperes at 2 to 7 volts.
Voltage selection for the filament supply is simply a mat-
ter of turning the voltage adjustment knob on the front
panel to the desired voltage.
To Use the Power Supply:
CAUTION—HIGH VOLTAGE:
• Play it safe: Always work with a partner.
• Wear rubber soled shoes.
• Work with one hand only. Keep the other hand in
your pocket or behind your back.
Plug the power cord into a well-grounded 115
VAC, 60 Hz or 230 VAC, 50 Hz outlet. (See label
on rear of unit).
Connect the appropriate output terminals of the power
supply to the circuit. (Connecting wires are not pro-
vided with the supply.) The -50 and 500 volt ranges,
as well as the filament supply, may all be used simul-
taneously.
Turn the 50 VOLT ADJUST knob and the 500 VOLT
ADJUST knob fully counterclockwise.
ON/OFF
500 V
50 V
DC
AC
2
3
4
5
6
7
V
mA
0
500 V
50 V
3 A MAX
RESET
50 V ADJUST 500 V ADJUST
HIGH
VOLTAGE
HIGH VOLTAGE POWER SUPPLY
SF-9585A
+
-
better
teach science
ways to
Phone (916) 786-3800 • FAX (916) 786-8905 • email: techsupp@PASCO.com
10101 Foothills Blvd. • P.O. Box 619011 • Roseville, CA 95678-9011 USA
®
Page view 0
1 2

Summary of Contents

Page 1 - HIGH VOLTAGE POWER SUPPLY

Instruction Sheetfor the PASCOModel SF-9585AHIGH VOLTAGE POWER SUPPLY012-05725B11/95$1.00© 1994 PASCO scientificThis instruction sheet edited by: Tom

Page 2 - SERVICE PERSONNEL

2High Voltage Power Supply 012-05725B®➃ Push the upper part of the ON/OFF switch on the frontpanel to turn on the unit. The switch will light to showt

Comments to this Manuals

No comments